1. PacificRack 促销 1核/512MB/500G流量/洛杉矶QuadraNet机房/$6.52/年 优惠码: PRVPS10OFF
    https://pacificrack.com/portal/aff.php?aff=637&pid=50 | 测速: https://www.openos.org/post/563
  2. 黑群晖 Synology Telegram群
    注意: 请在50秒内验证提问 https://t.me/nasfan
    排除公告

【完美解决】华擎j3455安装918+6.22硬解+网卡失联+开关机缓慢,附引导下载

本帖由 xinqi20002019-12-28 发布。版面名称:群晖 Synology DSM

  1. Wizard.Zero

    Wizard.Zero New Member

    注册:
    2020-02-23
    帖子:
    6
    你好,重启是指到这个界面重启Nas?软重启还是拔电源?
    重启后是能进系统还是重新安装,但不会再出现这个问题?
    谢谢
     
  2. jony83

    jony83 New Member

    注册:
    2019-07-31
    帖子:
    7
    i3 8100t是使用后 ls /dev/dr没有显卡信息
     
  3. ttylikl

    ttylikl New Member

    注册:
    2020-03-09
    帖子:
    6
    cpu占高是正常的。白群晖也会高的。

    但是我黑群晖也遇到了moments转图片格式导致重新启动的情况,甚至反复启动。
     
  4. ttylikl

    ttylikl New Member

    注册:
    2020-03-09
    帖子:
    6
     
  5. ttylikl

    ttylikl New Member

    注册:
    2020-03-09
    帖子:
    6
    我也遇到了。华擎j3455的小板子。918的6.2.1和6.2.2都遇到了同样的问题。确定vid和pid是对的。

    后来把bios从1.6升级到了1.8,把bios里的csm设置修改为传统,然后再次引导后,通过群晖助手软件直接安装dsm而不是通过web上传,然后就ok了。

    升级bios的可能性大一些。
     
  6. huihui123

    huihui123 New Member

    注册:
    2019-12-16
    帖子:
    25
    内存兼容性问题也会影响6.2.2安装
     
  7. 386

    386 New Member

    注册:
    2018-10-15
    帖子:
    12
    synoboot-ds918-1.04b-extra918plus_v0.8_syno
    synoboot-ds918-1.04b-extra918plus_v0.8_std
    synoboot-ds918-1.04b-extra918plus_v0.8_recovery
    有啥区别
     
    已获得 copy530 的点赞。
  8. lwt303

    lwt303 New Member

    注册:
    2020-02-26
    帖子:
    9
    1. "syno" - all extended i915 stuff removed and some firmware added to max compatibility, mainly for "iGPU gen9" (Skylake, Apollo Lake and some Kaby Lake) and older and cases where std did not work, i915 driver source date: 20160919, positive feedback for J3455 and J1800



    2. "std" - with jun's i915 driver from 1.04b (tested for coffee lake cpu from q2/2018), needed for anything newer then kaby lake like gemini lake, coffee lake, cannon lake, ice lake, i915 driver source date: 20180514 - as i had no source i915 driver is the same binary as in jun's original extra/extra2, on my system its working with a G5400, not just /dev/dri present, tested completely with really transcoding a video, so its working in general but might fail in some(?) cases, also 8th/9th gen cpu like i3/i5 8100/9400 produce a /dev/dri, tested with a 9400 and it does work



    3. "recovery" - mainly for cases where the system stops booting because of i915 driver (seen on N3150 braswell), it overwrites all gpu drivers and firmware with files of 0 size on booting so they can't be loaded anymore, should also work for any system above but guarantees not having /dev/dri as even the firmware used from the dsm's own i915 driver is invalid (on purpose) - if that does not work its most likely a network driver problem, safe choice but no transcoding support


    start with syno, then std and last resort would be recovery
    anything with a kernel driver oops in the log is a "invalid" as it will result in shutdown problems - so check /var/log/dmesg



    the often seen Gemini Lake GPU's might work with "std", pretty sure not with "syno", most (all?) testers with gemini lake where unsuccessful with "std" so if you don't like experimenting and need hardware transcoding you should wait with the version you have



    the "_mod" on the end of the loader name below is a reminder that you need to to "modding" as in make sure you have zImage and rd.gz from DSM 6.2.2 on you usb for booting, the new extra.lzma will not work with older files
    自己翻译一下吧。。。。。
     
  9. vicentPei

    vicentPei New Member

    注册:
    2019-11-17
    帖子:
    9
    确实有这个情况,我也再找解决方式
     
  10. copy530

    copy530 New Member

    注册:
    2020-03-12
    帖子:
    5
    十二分感谢。完美。我去试试看。